4kan.jst

Micro9-S-4CH 1.1g Servo Rx w/ESC

UTSOLGT !!! Designed for use with WES, Blue Arrow and Falcon servos using “mini-JST” plugs. Built-In 2 Amp motor speed control, Brushless ESC capable. Glitch Free Reliable Micro R/C



At less than 1 inch long, and 1.2grams weight, this lightweight servo capable receiver enables you to build lighter flying models. Pure Digital R/C link provides smooth and solid control. Compare with competitor receivers that weigh more than double.

You can control this receiver from the HFX900 transmitter, or you may wish to consider our HFX900 Monolith Transmitter Buddy Box Module, which can convert your old HiTec or Futaba transmitters to 900Mhz operation. Check out the Monolith Here It plugs right into your old Transmitter and is ready to go in a minute!

• 4 Channel receiver with mini-JST connectors for servo's - Plug and Play Easy Setup.

• Compatible with our 2.5g Servo, and other servo's using mini-JST connectors

• Compatible with all Plantraco HFX900 Transmitters (USA 900Mhz and European 868Mhz)

• Weight is 1.2g - designed for Micro R/C Models

• Built-in 2 Amp Motor Speed Control (2 pin nano connector socket for plug-and-play)

• Brushless ESC capable.

• Designed for operation with single Lithium Cell power source - Built-in Low Voltage Cut Off for lithium polymer power.

• 900Mhz UHF all digital radio link - antennas are 3 inches long!

• Solid Radio Link, and Breakthrough Price!

Order today and learn the fun of building and flying the smallest Micro R/C models.


Features:

• 4 PPM Channels
• On-Board Speed Controller
• Programmable Servo Reversing
• Programmable Brushless output
• Single Cell Low Voltage Cutoff
• 2 cell Capable (10v)

Great Match for our 2.5g servos



 

 
 
 


 



Receiver Specifications
Weight 1.1g
Channels (4) Rudder, Aileron, Elevator, Throttle
Voltage 2.8 - 10vdc, 2 cell Capable
Voltage Cutoff Single Cell
Dimensions 25m x 14mm x 5mm
Built in Speed Controller 2 amp Brushed
External ESC capable Yes, use a Brushless ESC
Channels (4) Rudder, Aileron, Elevator, Throttle
Voltage 2.8 - 10vdc, 2 cell Capable
Voltage Cutoff Single Cell
Dimensions 25m x 14mm x 5mm
Built in Speed Controller 2 amp Brushed
External ESC capable Yes, use a Brushless ESC
Channels (4) Rudder, Aileron, Elevator, Throttle
Voltage 2.8 - 10vdc, 2 cell Capable
Voltage Cutoff Single Cell
Dimensions 25m x 14mm x 5mm
Built in Speed Controller 2 amp Brushed
External ESC capable Yes, use a Brushless ESC
Channels (4) Rudder, Aileron, Elevator, Throttle
Voltage 2.8 - 10vdc, 2 cell Capable
Voltage Cutoff Single Cell
Dimensions 25m x 14mm x 5mm
Built in Speed Controller 2 amp Brushed
External ESC capable Yes, use a Brushless ESC
!
 <<